View A035CN01_1409370.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

doc. version 0 effective date 2002.05.22 total pages 19 (not include this cover page) note: the content of this specification is subject to change. ? 2002 au optronics all rights reserved, do not copy. model name: A035CN01 product specification 3.5 color tft- lcd module ( ) preliminary specification ( ) final specification www..net www..net
record of revision version revise date page content 0 22/may/2002 - first draft 1 30/dec/2002 8 viewing angle: [l/r] 40(min), 45(typical) www..net www..net
version : 0 page : 1/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp appendix: fig.1 outline dimension of tft-lcd module ....................................... p12 fig.2 sampling clock timing ....................................................... p13 fig.3 horizontal display timing range ............................................. p14 fig.4-(a) horizontal timing ........................................................ p15 fig.4-(b) detail horizontal timing .................................................. p16 contents: a. physical specifications .................................................... p3 b. electrical specifications ................................................... p4 1. pin assignment ............................................................ p4 2. absolute maximum ratings ................................................. p5 3. electrical characteristics .................................................... p6 a. typical operating conditions ............................................. p6 b. current consumption .................................................... p6 4. ac timing ................................................................. p7 a. timing conditions ....................................................... p7 b. timing diagram ......................................................... p7 c. optical specifications ..................................................... p8 d. reliability test items ....................................................... p10 e. packing form ............................................................... p11 www..net www..net
version : 0 page : 2/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp fig.5 vertical shift clock timing .................................................... p17 fig.6-(a) vertical timing (from up to down) . ....................................... p18 fig.6-(b) vertical timing (from down to up) ....................................... p19 www..net www..net
version : 0 page : 3/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp a. physical specifications no. item specification remark 1 display resolution(dot) 480(w) 234(h) 2 active area(mm) 72(w) 50.544(h) 3 screen size(inch) 3.5(diagonal) 4 dot pitch(mm) 0.150(w) 0.216(h) 5 color configuration r. g. b. delta 6 overall dimension(mm) 82.8(w) 60(h) 6(d) note 1 7 weight(g) tbd note 1: refer to fig. 1. www..net www..net
version : 0 page : 4/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp b. electrical specifications 1.pin assignment pin no symbol i/o description remark 1 sthl i/o start pulse for horizontal scan line note 1 2 oeh i output enable input for data driver 3 q1h i analog signal rotate input 4 cph1 i sampling and shifting clock pulse for data driver 5 cph2 i sampling and shifting clock pulse for data driver 6 cph3 i sampling and shifting clock pulse for data driver 7 gnd - ground 8 vb i alternated video signal input(blue) 9 vg i alternated video signal input(green) 10 vr i alternated video signal input(red) 11 nc - this pin should be electrical opened during operation 12 l/r i left/right scan control input note 1,2 13 sthr i/o start pulse for horizontal scan line note 1 14 av dd i supply voltage for analog circuit 15 vcom i common electrode driving signal 16 v gh i positive power for scan driver 17 v cc i logic power for scan & data driver 18 stvl i/o vertical start pulse note 1 19 oev i output enable input for scan driver 20 ckv i shit clock input for scan driver 21 u/d i up/down scan control input note 1,2 22 stvr i/o vertical start pulse note 1 23 nc - this pin should be electrical opened during operation 24 v gl i negative power for scan driver note 1 : selection of scanning mode setting of scan control input in/out state for start pulse u/d l/r stvr stvl sthr sthl scanning direction gnd v cc out in out in from up to down, and from left to right. v cc gnd in out in out from down to up, and from right to left. gnd gnd out in in out from up to down, and from right to left. v cc v cc in out out in from down to up, and from left to right. www..net www..net
version : 0 page : 5/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp in: input; out: output. note 2 : definition of scanning direction. refer to figure as below: 2. absolute maximum ratings item symbol condition min. max. unit remark v cc gnd=0 -0.3 7 v av dd av ss =0 -0.3 7 v v gh -0.3 18 v v gl -18 0.3 v power voltage v gh v gl gnd=0 - 33 v v i -0.3 av dd +0.3 v note 1 v i -0.3 v cc +0.3 v note 2 input signal voltage vcom -2.9 5.2 v operating temperature topa 0 60 ambient temperature storage temperature tstg -25 80 ambient temperature note 1: vr, vg, vb note 2: sthl, sthr, q1h, oeh, l/r, cph1~cph3, stvr, stvl, oev, ckv, u/d. 3. electrical characteristics a. typical operating conditions (gnd=avss=0v, note 5) item symbol min. typ. max. unit remark v cc 3 5 5.2 v av dd 4.8 5 5.2 v v gh 14.3 15 15.7 v power supply v glac 3.5 5 7.5 vp-p ac component of v gl. note 1 www..net www..net
version : 0 page : 6/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp v gl h -10 -9.5 -9 v high level of v gl. v ia av ss +0.4 - av dd -0.4 v note 2 v iac - 3 - v ac component video signal amplitude (vr,vg,vb) v idc - av dd /2 - v dc component v cac 3.5 5 7.5 vp-p ac component, note 3 vcom v cdc - 1.1 - v dc component h level v ih 0.8vcc - v cc v input signal voltage l level v il 0 - 0.2vcc v note 4 note 1: the same phase and amplitude with common electrode driving signal (vcom). note 2: refer to fig.4- (a) note 3: the brightness of lcd panel could be adjusted by the adjustment of the ac component of vcom. note 4: sthl, sthr, q1h, oeh, l/r, cph1~cph3, stvr, stvl, oev, ckv, u/d. note 5: be sure to apply gnd, v cc , v gl to the lcd first, and then apply v gh . b. current consumption (gnd=avss=0v) parameter symbol condition min. typ. max. unit remark i gh v gh =15v - 50 100 a i gl v gl_h =-9.5v - -0.2 -0.6 m a i cc v cc =5v - 1.5 4 m a current for driver i dd av dd =5v - 5 10 m a c. backlight driving conditions parameter symbol min. typ. max. unit remark lamp voltage v l - 260 290 vrms note 3 lamp current i l 2.3 2.5 3.3 marms frequency f l 55 60 65 khz note 3,4 - - 550 vrms note 1,3,5 lamp starting voltage v s - - 850 vrms note 2,3,5 note 1: ta = 25 . note 2: ta = 0 . note 3: reference value, correct value is subject to final backlight specification which will be decided in the future. note 4: the lamp frequency should be selected as different as possible from display horizontal synchronous signal to avoid interference. note 5: for starting the backlight unit, the output voltage of dc/ac s transformer should be larger than the maximum lamp starting voltage. www..net www..net
version : 0 page : 7/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp 4. ac timing a. timing conditions parameter symbol min. typ. max. unit. remark rising time t r - - 10 ns note 1 falling time t f - - 10 ns note 1 high and low level pulse width t cph 299 308 319 ns cph1~cph3 cph pulse duty t cwh 40 50 60 % cph1~cph3 cph pulse delay t c12 t c23 t c31 70 t cph /3 t cph /2 ns cph1~cph3 sth setup time t suh 35 - - ns sthr,sthl sth hold time t hdh 35 - - ns sthr,sthl sth pulse width t sth - 1 - t cph sthr,sthl sth period t h 61.5 63.5 65.5 s sthr,sthl oeh pulse width t oeh - 3 - t cph oeh sample and hold disable time t dis1 4 8.6 - s oev pulse width t oev - 12 - t cph oev ckv pulse width t ckv 16 28 40 t cph ckv clean enable time t dis2 - 10 - t cph horizontal display start t sh - 0 - t cph /3 horizontal display timing range t dh - 480 - t cph /3 stv setup time t suv 400 - - ns stvl,stvr stv hold time t hdv 400 - - ns stvl,stvr stv pulse width t stv - - 1 t h stvl,stvr horizontal lines per field t v 256 262 268 t h vertical display start t sv - 3 - t h vertical display timing range t dv - 234 - t h vcom rising time t rcom - - 3 s vcom falling time t fcom - - 3 s vcom delay time t dcom - - 3 s rgb delay time t drgb - - 1 s note 1: for all of the logic signals. b. timing diagram please refer to the attached drawings, from fig.2 to fig.6. www..net www..net
version : 0 page : 8/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp c. optical specification (note 1,note 2, note 3 ) item symbol condition min. typ. max. unit remark rise tr - 20 30 ms response time fall tf =0 - 30 40 ms note 4, 6 contrast ratio cr at optimized viewing angle 100 150 - note 5, 6 top 10 - - bottom 30 - - left 40 45 - viewing angle right cr R 10 40 45 - deg . note 6, 7 brightness y l =0 200 250 - nit x 0.26 0.31 0.36 note 8 white chromaticity shift y =0 0.28 0.33 0.38 note 1: ambient temperature =25 . note 2: to be measured in the dark room. note 3: to be measured at the center area of panel with a viewing cone of 1 by topcon luminance meter bm-7, after 10 minutes operation. note 4: definition of response time: the output signals of photodetector are measured when the input signals are changed from black to white (falling time) and from white to black (rising time), respectively. the response time is defined as the time interval between the 10% and 90% of amplitudes. refer to figure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10 % 90 % 100 % www..net www..net
version : 0 page : 9/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp note 5. definition of contrast ratio: contrast ratio is calculated with the following formula. contrast ratio (cr)= note 6. white vi=v i50 1.5v black vi=v i50 2.0v means that the analog input signal swings in phase with com signal. means that the analog input signal swings out of phase with com signal. v i50 : the analog input voltage when transmission is 50% the 100% transmission is defined as the transmission of lcd panel when all the input terminals of module are electrically opened. note 7. definition of viewing angle: refer to figure as below. note 8. measured at the center area of the panel when all the input terminals of lcd panel are electrically opened. phot odetector output when lcd is at white state photodetector output when lcd is at black state www..net www..net
version : 0 page : 10/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp d. reliability test items: no. test items conditions remark 1 high temperature storage ta= 80 240hrs 2 low temperature storage ta= -25 240hrs 3 high temperature operation ta= 60 240hrs 4 low temperature operation ta= 0 240hrs 5 high temperature and high humidity ta= 60 . 95% rh 240hrs operation 6 heat shock -25 ~80 , 50 cycles, 2h/cycle non-operation 7 electrostatic discharge 200v,200pf(0 ), once for each terminal non-operation frequency range : 10~55hz stoke : 1.5mm sweep : 10~55hz~10hz 2 hours for each direction of x,y,z 8 vibration (6 hours for total) jis c7021, a-10 condition a 9 mechanical shock 100g . 6ms, x, y, z 3 times for each direction jis c7021, a-7 condition c 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C 6db/octave from 200~500hz iec 68-34 11 pressure test of panel surface 8kgf, 1min, 5mm in center and four corners of panel 12 drop (with carton) height: 80cm 1 corner, 3 edges, 6 surfaces note: ta: ambient temperature. www..net www..net
version : 0 page : 11/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp e. packing form ?? tape N tape N carton label ? www..net www..net
version : 0 page : 12/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp a u www..net www..net
version : 0 page : 13/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp 5 0 % 5 0 % 1 0 % 1 0 % 9 0 % 9 0 % s t h l ( r ) c p h 1 c p h 2 c p h 3 s t h t s u h t t h d h c 1 2 t t c 3 1 t c 2 3 c p h t t c w h t r f t www..net www..net
version : 0 page : 14/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp i n p u t ( s t h l / s t h r ) o u t p u t ( s t h r / s t h l ) c p h 1 t d h www..net www..net
version : 0 page : 15/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp o e h o e v v c o m 1 h t h v c d c c a c v c a c v v i d c b l a n k b l a c k v i a v i a c w h i t e b l a c k b l a n k w h i t e ( h s y ) s t h l ( r ) q 1 h v c k v g l r ( g b ) v f i g . 4 ( a ) h o r i z o n t a l t i m i n g v g l _ h v g l _ a c www..net www..net
version : 0 page : 16/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp o e h o e v v c o m ( h s y ) s t h l ( r ) q 1 h v c k v g l r ( g b ) v 1 h t d i s 2 o e h t t d i s 1 t s t h t o e v t c k v t f c o m 1 0 % 9 0 % 9 0 % 1 0 % 1 0 % 9 0 % 5 0 % 5 0 % 1 0 % 9 0 % t d c o m t r c o m t d r g b f i g . 4 - ( b ) d e t a i l h o r i z o n t a l t i m i n g www..net www..net
version : 0 page : 17/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp s t v l ( r ) c k v 5 0 % 5 0 % t s u v h d v t t c k v f i g . 5 v e r t i c a l s h i f t c l o c k t i m i n g www..net www..net
version : 0 page : 18/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp v c o m ( e v e n f i e l d ) v c o m ( o d d f i e l d ) s t v l ( v s y ) q 1 h d i s p l a y o n p a n e l f i r s t l i n e v r ( g b ) ( h s y ) t s v f i g . 6 - ( a ) v e r t i c a l t i m i n g ( f r o m u p t o d o w n ) www..net www..net
version : 0 page : 19/ 19 all rights strictly reserved. any portion of this prper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp v c o m ( e v e n f i e l d ) s t v r ( v s y ) q 1 h d i s p l a y o n p a n e l f i r s t l i n e v r ( g b ) ( h s y ) t s v v c o m ( o d d f i e l d ) f i g . 6 - ( b ) v e r t i c a l t i m i n g ( f r o m d o w n t o u p ) www..net www..net

▲Up To Search▲

Price & Availability of A035CN01

	To Download A035CN01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .